Nityanand's Weblog

  • view my stats

    free page hit counter
  • Earn Money by viewing ads

  • Useful Links

Posts Tagged ‘Help’

How can we take help from Front-End Simulators like ncverilog, modelsim, vcs etc.

Posted by Nityanand Dubey on October 10, 2008

Each EDA Tool assigns a warning or a error as it finds anything abnormal in the written code and due to severity of the warning/Error, it decides to proceed further or not.

Many times, the tool given messages are not comprehensive and user needs to know some more details about the reason of failures.


Here are some tool help techniques to find the help about the respective Error/warning/messages


  1. Simulator : NC-Verilog

NC-Verilog is a simulator provided by Cadence design system. It is a part of IUS package offered by the cadence. There is a utility (executable) present in this package in terms of providing quick details of messages. This utility is called “nchelp”


This executable path should be present in your executable path list. It can be checked with the “which” command


> which nchelp

/path/to/your/installation/area/bin/nchelp


If the utility is not in the path list, Either you can add it or also you can use the executable with the complete path (from installation area)

Usage :

> nchelp [options] tool error


Example :

Here is an example of error message –

ncelab: *W,SBNGL2 (./dut.v,1366|11): The sum of both limits in $setuphold or $recrem is less than the tolerance value: the negative limit will be set to zero.


Now If user wants to see the description of the error –


Ø nchelp ncelab SBNGL2

Here – ncelab is the utility for elaboration used by nc-verilog simulator

SBNGL2 – the Error Code


Output from this command –


nchelp: 08.10-s005: (c) Copyright 1995-2008 Cadence Design Systems, Inc.


ncelab/SBNGL2 =

The magnitude of the negative limit value minus the positive limit value in a $setuphold or $recrem timing check must be less than or equal to the tolerance value given by -ntc_tolerance option (by default, the tolerance value is 0).

The limits will be adjusted: by default, the negative limit will bet set to 0. However, if -ntc_neglim is specified, the negative limit will be adjusted to match the positive limit; if the -ntc_poslim is specified, the positive limit will be adjusted to match the negative value.


  1. Simulator : ModelSim

In ModelSim Simulator, It assigns an message number with all the messages. To get the details of the specific warning/error, User needs to use the associated number.

To provide help for debugging, ModelSim provides a Utility called “verror”


First User needs to be sure that the executable path is present in the global path list. This can be checked as

Ø which verror

This should show a valid path of executable “verror”

Now, User needs to write the Error number with this command


Syntax :

verror < message id>


Example

> veeror 3035


Output :

vsim Message # 3035:

This warning occurs when the level of an instantiation reaches a certain depth. It indicates that the instantiation might be recursive. A further attempt is made to complete the instantiation. If the maximum depth is reached then an elaboration error is generated.

Advertisements

Posted in ASIC Design Flow | Tagged: , , , , | Leave a Comment »